Fine bubble technology for the green synthesis of fairy chemicals.

Fairy chemicals (FCs), such as 2-azahypoxanthine (AHX), are a potential new class of plant hormones that are naturally present in plants and produced via a novel purine metabolic pathway. FCs support plant resilience against various stresses and regulate plant growth. In this study, we developed a four-step method for synthesising AHX from 2-cyanoacetamide, achieving a good yield. Oxime was obtained from 2-cyanoacetamide via the oximation reaction. Cascade-type one-pot selective Pt/C-catalysed reduction of oxime, followed by a coupling reaction with formamidine acetate, yielded intermediate 5-amino-1H-imidazole-4-carboxamide (AICA). For the synthesis of AICA from oxime, we used modern fine bubble technology, affording AICA in 69% yield. Subsequently, we synthesised 4-diazo-4H-imidazole-5-carboxamide (DICA) from AICA via the diazotisation reaction. Notably, the synthesis of DICA from AICA was achieved, and the stability of previously known less stable DICA in the solid state was confirmed. Finally, PhI(OAc)2 (0.5 mol%) catalysed the intramolecular cyclisation of DICA in the green solvent water to yield AHX (overall yield of 47%). This study's innovative techniques and substantial discoveries highlight its potential influence and significance in FC science, thereby establishing a new standard for subsequent research.

Late-Stage Derivatization of Oleanolic Acid-Based Anti-HIV-1 Compounds.

A 12-keto-type oleanolic acid derivative (4) has been identified as a potent anti-human immunodeficiency virus type-1 (HIV-1) compound that demonstrates synergistic effects with several types of HIV-1 neutralizing antibodies. In the present study, we used a common key synthetic intermediate to carry out the late-stage derivatization of an anti-HIV compound based on the chemical structure of a 12-keto-type oleanolic acid derivative. To execute this strategy, we designed a diketo-type oleanolic acid derivative (5) for chemoselective transformation, targeting the carboxy group and the hydroxyl group on the statine unit, as well as the 3-carbonyl group on the oleanolic acid unit, as orthogonal synthetic handles. We carried out four types of chemoselective transformations, leading to identification of the indole-type derivative (16) as a novel potent anti-HIV compound. In addition, further optimization of the ß-hydroxyl group on the statine unit provided the R-4-isobutyl γ-amino acid-type derivative (6), which exhibited potent anti-HIV activity comparable to that of 4 but with reduced cytotoxicity.

Amide-to-chloroalkene substitution for overcoming intramolecular acyl transfer challenges in hexapeptidic neuromedin U receptor 2 agonists.

CPN-116 is a peptidic agonist that activates human neuromedin U receptor type 2 (NMUR2) but suffers from chemical instability due to inherent backbone isomerization on the Dap residue. To address this, a Leu-Dap-type (Z)-chloroalkene dipeptide isostere was synthesized diastereoselectively as a surrogate of the Leu-Dap peptide bond to develop a (Z)-chloroalkene analogue of CPN-116. The synthesized CPN-116 analogue is stable in 1.0 M phosphate buffer (pH 7.4) without backbone isomerization and can activate NMUR2 with similar potency to CPN-116 at nM concentrations (EC50 = 1.0 nM).

Do Ultrafine Bubbles Work as Oxygen Carriers?

Fine bubbles (FBs) are bubbles with sizes less than 100 µm and are divided into ultrafine bubbles (UFBs, < 1 µm) and microbubbles (MBs, 1-100 µm) depending on their size. Although FB aeration is known as a more efficient way than macrobubble aeration to increase the oxygen level in unoxygenated water, few reports have demonstrated whether dispersed UFBs work as oxygen carriers or not. Furthermore, oxygen supersaturation is one of the attractive characteristics of FB dispersion, but the reason is yet to be revealed. In this study, we evaluated the relationship between the FBs, especially UFB concentration, and oxygen content in several situations to reveal the two questions. The FB concentration and oxygen content were examined using particle analyzers and our developed oxygen measurement method, which can measure the oxygen content in FB dispersion, respectively. First, in the evaluations of the oxygen dispersion from UFBs with respect to the surrounding oxygen level, UFBs did become neither small nor diminish even in degassed water. Second, the changes in UFBs and oxygen content upon storage temperature and the existence of a lid during storage were evaluated, and there was no correlation between them. It means UFBs contribute little to the oxygen content in UFB dispersion. Furthermore, the oxygen content in the UFB dispersion decreased over time identically as that of the oxygen-supersaturated water with little UFBs. Third, we evaluated the relationship between FB concentration and oxygen content during FB generation by measuring them simultaneously. The results showed that dispersed MB and UFB concentrations did not account for the supersaturation of the FB dispersion. From the result, it was revealed that 100-200 nm of UFBs themselves did not work as oxygen carriers, and the oxygen supersaturation in FB dispersions was due to the supersaturated state of dissolved oxygen that was prepared during the FB generation process.

Synthesis of benzylated amine-substituted xanthone derivatives and their antioxidant and anti-inflammatory activities.

Oxidative stress and its constant companion, inflammation, play a critical part in the pathogenesis of many acute and chronic illnesses. The discovery of new multi-targeted drug candidates with antioxidant and anti-inflammatory properties is deemed necessary. Thus, a series of novel xanthone derivatives with halogenated benzyl (4b-4d, 4f-4h) and methoxylated benzyl groups (4e) attached to the butoxy amine substituent were synthesized in this study. The synthesized xanthone derivatives exhibited stronger antioxidant activity against H2 O2 scavenging than the standard drug, α-tocopherol, but weaker towards DPPH scavenging and ferrous ion chelation. Besides that, 4b-4d, 4f-4h demonstrated good anti-inflammatory activities through NO production inhibition towards lipopolysaccharide (LPS)-induced RAW 264.7 cells and showed 2-4 times stronger effects than the standard drug, diclofenac sodium. Moreover, compound 4b with two brominated benzyl groups attached to the butoxy amine substituent suppressed the production of pro-inflammatory cytokines, TNF-α and IL-1ß, significantly. Structure-activity relationship elucidated that the halogenated benzylamine substituent plays an important role in contributing the antioxidant and anti-inflammatory activities of xanthones. In summary, xanthone 4b was identified as a potential lead compound to be further developed into antioxidant and anti-inflammatory drugs. Thus, further studies on the related mechanisms of action of 4b are recommended.

Hydrazide-Mediated Solubilizing Strategy for Poorly Soluble Peptides Using a Dialkoxybenzaldehyde Linker.

Proteins modified in a controlled manner with artificial moieties such as fluorophores or affinity tags have been shown to be a powerful tool for functional or structural analysis of proteins. A reliable way to prepare proteins with a well-defined modification is protein synthesis. Although many successful syntheses have been reported, the poor aqueous solubility of synthetic intermediates causes difficulty in the chemical synthesis of proteins. Here we describe a solubilizing strategy for poorly soluble peptides which uses chemoselective incorporation of a hydrophilic tag onto a hydrazide in a peptide. We found that a hydrophilic tag possessing a dialkoxybenzaldehyde moiety can react with peptide hydrazides through reductive N-alkylation. No protecting groups are required for this reaction, and peptides modified in this way show enhanced solubility and consequently good peak separation during HPLC purification. The tag can be removed subsequently by treatment with trifluoroacetic acid to generate a free hydrazide, which can be converted in a one-pot reaction to a thioester for further modification. This method was validated by synthesis of a Lys63-linked ubiquitin dimer derivative. This late-stage solubilization can be applied in principal to any peptide and opens the possibility of the synthesis of proteins that have previously been considered inaccessible due to their poor solubility.

Design, synthesis, and bio-evaluation of novel triterpenoid derivatives as anti-HIV-1 compounds.

Two betulinic acid derivatives, RPR103611 (2) and IC9564 (3) were previously reported to be potent HIV-1 entry inhibitors. In this current study, a SAR study of the triterpenoid moiety of 2 and 3 has been performed and an oleanolic acid derivative (4) was identified as a novel HIV-1 entry inhibitor. In addition, the combination of 4 with several-type of HIV-1 neutralizing antibodies provided significant synergistic effects. The synthetic utility of the CC double bond in the C-ring of 4 was also demonstrated to develop the 12-keto-type oleanolic acid derivative (5) as a potent anti-HIV compound. This simple transformation led to a significantly increased anti-HIV activity and a reduced cytotoxicity of the compound.

Synthesis and Characterization of Cyclodextrin-Based Polyhemiaminal Composites with Enhanced Thermal Stability.

Polyhemiaminal (PHA) polymers are a new class of thermosetting polymers that have recently gained attention owing to their high mechanical strength and excellent recycling behavior. However, low thermal stability is a common issue in PHA polymers due to the thermally labile crosslinked knots. Herein, crosslinked PHA polymer composites were synthesized by reacting formaldehyde with a precursor solution of 4,4'-oxydianiline (ODA) and cyclodextrins (CDs) (α-, ß-, and γ-). The material obtained under optimal conditions (ODA:CD molar ratio of 1:0.5, 37% aqueous solution of formaldehyde (formalin)) exhibited good film formability and high thermal stability with two characteristic decomposition phenomena and a high char yield. The early decomposition of CDs and char formation led to high thermal stability. Time-resolved NMR analysis was conducted to study hemiaminal bond formation via a condensation reaction between ODA and formaldehyde. Furthermore, PHA matrix formation was confirmed by the dissolution of the deposited CD layer in a solution of N-methyl-2-pyrrolidinone containing 8-9 wt.% LiBr at 80 °C and FTIR analysis. Based on the elemental analysis results, PHA network formation was confirmed by considering a single unit of the PHA network with CD composition, including the solvent and water.

Electrodeless hydrogen production from seawater using femtosecond laser pulses.

This study presents the first experimental evidence of direct H2 production from seawater without harmful gas emissions (e.g., CO2, Cl2), which uses multiphoton ionization water splitting with a femtosecond pulse laser. According to H2 analysis using a gas chromatograph, the H2 production rate in seawater was 70 µmol h-1, which was approximately 3.3 times more than the ultrapure water case reported in the literature. This positive effect derives from focusing through the cuvette wall and the more significant Kerr effect in seawater. Such ion enhancement was observed in the case of seawater and diluted seawater compared with the ultrapure water case, but excessive salt can lead to ion suppression and adverse effects. These differences in salinity suggest appearances of nonlinear optical effects near the focal point and ionization of metallic elements with low ionization potential and are discussed in relation to results of bubble visualization, gas composition analysis, and pressure measurement in gaseous products.

Synthesis and Structural Characterization of ß-Turn Mimics Containing (Z)-Chloroalkene Dipeptide Isosteres.

Described here is the synthetic, spectroscopic, crystallographic, and computational analysis of a series of peptidomimetics containing l-Xaa-d-Yaa-type (Z)-chloroalkene dipeptide isosteres (CADIs) that were measured in an investigation of the ß-turn mimicry of this peptide bond surrogate. We found that the 1,3-allylic strain across the chloroalkene moiety engenders the hyperconjugative interactions between the chloroalkene moiety and the C-H bonding or antibonding orbitals of the C-H bonds in allylic positions. These effects contribute significantly to the stabilization of ß-turn structures.

Stereoselective synthesis of highly functionalized (Z)-chloroalkene dipeptide isosteres containing an α,α-disubstituted amino acid.

Described here is the first stereoselective synthesis of highly functionalized chloroalkene dipeptide isosteres containing an α,α-disubstituted amino acid (ααAA). This synthesis requires the construction of a quaternary carbon center, and this challenge was overcome by the Aza-Darzens condensation of ketimine with α,α-dichloroenolate, producing 2-chloroaziridines with quaternary carbon centers including spirocyclic motifs, which are valuable for the previously elusive synthesis of various ααAA-containing chloroalkene isosteres.

Late-Stage Solubilization of Poorly Soluble Peptides Using Hydrazide Chemistry.

A novel late-stage solubilization of peptides using hydrazides is described. A solubilizing tag was attached through a selective N-alkylation at a hydrazide moiety with the aid of a 2-picoline-borane complex in 50% acetic acid-hexafluoro-2-propanol. The tag, which tolerates ligation and desulfurization conditions, can be detached by a Cu-mediated selective oxidative hydrolysis of the N-alkyl hydrazide. This new method was validated through the synthesis of HIV-1 protease.

Highly effective volatile organic compound dissolving strategy based on mist atomization for odorant biosensors.

The detection of volatile organic compound (VOC) mixtures is crucial in the medical and security fields. Receptor-based odorant biosensors sensitively and selectively detect odorant molecules in a solution; however, odorant molecules generally exist as VOCs in the air and exhibit poor water solubility. Therefore, techniques that enable the dissolution of poorly water-soluble VOCs using portable systems are essential for practical biosensors' applications. We previously proposed a VOC dissolution method based on water atomization to increase the surface area via the generation of fine bubbles, as a proof-of-concept; however, the system was lab-based (non-mobile) and the dissolution was limited to one VOC. In this study, we established a highly effective VOC dissolution method based on mist atomization that can be used in the field. This new method demonstrated a rapid dissolution potential of a sparsely-soluble VOC mixture with various functional groups in distilled water (DW) within 1 min, without the use of any organic solvents. Calcium imaging revealed that odorant receptor 13a-expressing Sf21 cells (Or13a cells) responded to 1-octen-3-ol in the mixture. Further, we successfully developed a field-deployable prototype vacuum and dissolution system with a simple configuration that efficiently captured and rapidly dissolved airborne 1-octen-3-ol in DW. This study proposes a field-deployable system that is appropriate for solubilizing various airborne odorant molecules and therefore is a practical strategy to use in the context of odorant biosensors.

Pendant Alkoxy Groups on N-Aryl Substitutions Drive the Efficiency of Imidazolylidene Catalysts for Homoenolate Annulation from Enal and Aldehyde.

Hydrogen-transfer in the tetrahedral intermediate generated from an imidazolylidene catalyst and α,ß-unsaturated aldehyde forms a conjugated Breslow intermediate. This is a critical step affecting the efficiency of the NHC-catalyzed γ-butyrolactone formation via homoenolate addition to aryl aldehydes. A novel type of imidazolylidene catalyst with pendant alkoxy groups on the ortho-N-aryl groups is described. Catalyst of this sort facilitates the formation of the conjugated Breslow intermediate. Studies of the rate constants for homoenolate annulation affording γ-butyrolactones, reveal that introduction of the oxygen atoms in the appropriate position of the N-aryl substituents can increase the efficiency of imidazolylidene catalysts. Structural and mechanistic studies revealed that pendant alkoxy groups can be located close to the proton of the tetrahedral intermediate, thereby facilitating the proton transfer.

Stereoselective synthesis of Gly-Gly-type (E)-methylalkene and (Z)-chloroalkene dipeptide isosteres and their application to 14-mer RGG peptidomimetics.

Stereoselective and efficient synthesis of Gly-Gly-type (E)-methylalkene and (Z)-chloroalkene dipeptide isosteres is realized by organocuprate-mediated single electron transfer reduction. The synthetic isosteres can be used in Fmoc-based solid phase peptide synthesis, resulting in the preparation of the 14-mer RGG peptidomimetics containing an (E)-methylalkene or a (Z)-chloroalkene unit.

Chemoselective Umpolung of Enals for Asymmetric Homoenolate Cross-Annulation of Enals and Aldehydes Catalyzed by N-Heterocyclic Carbene.

An asymmetric homoenolate cross-annulation of enals and aldehydes with high enantioselectivity is realized by NHC-catalyzed chemoselective umpolung of enals. The reaction proceeds in a highly chemoselective manner, selectively generating the conjugated Breslow intermediates from enals rather than aldehydes, enabling the homoenolate addition of enals to aldehydes in preference to competing acyl anion-mediated reactions. Enantioenriched substituted γ-butyrolactones are formed in good yields with high enantioselectivities.

Estimation of Outlet Temperature of a Flow Reactor Heated by Microwave Irradiation.

Flow reactors heated by microwave irradiation attract attention. The reactors are suitable for difficult synthesis processes due to rapid heating and cooling, and easy pressurization. In order to predict the quality of the product, it is appropriate to estimate the outlet conditions of the reactor. In this paper, the outlet temperature of the flow direction is estimated by using the flow condition and dynamic thermal energy balance of the reactor.

Rapid Optimization of Reaction Conditions Based on Comprehensive Reaction Analysis Using a Continuous Flow Microwave Reactor.

Generally, the flow method has the advantage of a precise control over the reaction parameters and a facile modification of the reaction conditions, while a continuous flow microwave reactor allows for the quick optimization of reaction conditions owing to the rapid uniform heating. In this study, we developed a "9+4+1 method" to optimize reaction conditions based on comprehensive reaction analysis using a flow microwave reactor. The proposed method is expected to contribute to the synthesis of various fine and bulk chemicals by reducing cost and wastage, and by conserving time.

7-Hydroxy- N-Methylquinolinium Chromophore: A Photolabile Protecting Group for Blue-Light Uncaging.

The development of the N-methyl-7-hydroxymethylquinolinium ( N-Me-7-HQm) caging chromophore as a novel visible-light-sensitive photolabile protecting group is described. N-Me-7-HQm-caged compounds can be photoactivated by blue-light-emitting diode (LED) light (458 nm) with high photolytic efficiency, supporting applications to caging chemistry, and they also have sufficient water solubility and high resistance to spontaneous hydrolysis.

Direct synthesis of N-terminal thiazolidine-containing peptide thioesters from peptide hydrazides.

We report a simple and promising synthetic method to oxidize peptide hydrazides containing N-terminal thiazolidine as a protected cysteine. This yields the corresponding thioester via a peptide azide without decomposition of the thiazolidine ring. The newly developed protocol was validated by the synthesis of the bioactive peptide LacZα.